The Vice Grip has lots of names in the trade like, JAW, FROG, CLAMP, PULLING THING,

This product is the professional belt fitter use for pulling and stripping end of the vulcanisied splice and will pull 850 kgs.

If you know how this works then 'the more you pull, the tighter they grip on' .

 we would rate this at 1000kgs or 9.5kn SWL

Contact us for more information

we are one of only a few companies that make conveyor belt winding and cutting equipment 

call the team for besoke prices on slitting and winding machines 

for sale here is a winder i made for projet and only used a few times

can take 1800mm wide belt and wrap up 300+ meters of 10mm thick belting 

with 3 phase 1.2kw motor that pulls 1750n/m so very versatile unit 

delivery on this item is 3 weeks from order 

if you need a bespoke belt winder / reeler please download and print off the product detail and send back to us for a full quote 

Contact us for more information

• Extendable Double acting roller  from 700 mm to 1100 mm to enable you to do splices  of -600 to 2m wide 
•  
• contact us for more information

​Non-adjustable cold, cure, stitching, rollers available

The Conveyor Shop Vulcanising Press

MVP-1930

This press is 3 phase and works on a 22* bias 19 inch / 480mm (A) 

down the side of the plate 30 inch /760mm (B) 

Recommended maximum belt width 24 ich / 610mm (C) 

( The maximum length across the Platen is 28 inch / 710mm ) (E)

Control box and leads 415v 50Hz

comes with:

4 x Lightweight aluminium beams (AE 1060 X 178 X 197 mm ) 21kgs each

4 x Retaining bolts. 

1 x Pair of platens with new silicone heating elements with fast heat up and rapid water cooling.

1x New design air bag with universal quick coupling. 

1 x control box with a pair of leads with harting type connector 

1x Power cable ( 5pin 32amp) 

1 x Set of ‘in and out’ fast water cooling pipes (water pumps for cooling can be sold separately) 

Equipment fully tested in the Conveyor shop workshop in Leicester and holds two year guarantee. 

Full parts and repair service available.

Offering great size versatility with complete coverage of all splice lengths, either fabric ply and steelcord. 

Air to 100 psi, or water bag 200psi (water pumps separately sold )

MVP (modular vulcanising press)  is extremely portable as its a modular design so great for the workshop or on site.

The Conveyor shop have worked on this project for many years to give the best Quality and usable product

Full training on how to use equipment available free of charge,

Also Conveyor belt splice training can be carried out on your site. 

For more information, please do not hesitate to contact us.

The Conveyor Shop

Please get in contact for a detailed quote and specification sheet sent directly to your email. 

There are many options for larger Platens longer splices, just send us your enquiry and belt specification anywhere in the world and will come back to you fast with a quote 

As we keep control of the manufacturing process we are able to deliver all presses within 10 weeks from order

and we hold a great amount of stock here in the UK with full spares back up. 

The Conveyor Shop Vulcanising Press

MVP-1937 (480mm x 940mm ) 

Recommended maximum belt width 30 ich / 760mm 

( The maximum length across the Platen is 34 inch / 865mm )

Control box and leads 415v 50Hz

This press is 3 phase and works on a 22* bias 

comes with:

4 x Lightweight aluminium beams (AE 1240 X 178 X 197 mm ) 25kgs

4 x Retaining bolts. 

1 x Pair of platens with new silicone heating elements with fast heat up and rapid water cooling.

1x New design air bag with universal quick coupling. 

1 x control box with a pair of leads with harting type connector 

1x Power cable ( 5pin 32amp) 

1 x Set of ‘in and out’ fast water cooling pipes (water pumps for cooling can be sold separately) 

Equipment fully tested in the Conveyor shop workshop in Leicester and holds two year guarantee. 

Full parts and repair service available.

Offering great size versatility with complete coverage of all splice lengths, either fabric ply and steelcord. 

Air to 100 psi, or water bag 200psi (water pumps separately sold )

MVP (modular vulcanising press)  is extremely portable as its a modular design so great for the workshop or on site.

The Conveyor shop have worked on this project for many years to give the best Quality and usable product

Full training on how to use equipment available free of charge,

Also Conveyor belt splice training can be carried out on your site. 

For more information, please do not hesitate to contact us.

The Conveyor Shop

Please get in contact for a detailed quote and specification sheet sent directly to your email. 

There are many options for larger Platens longer splices, just send us your enquiry and belt specification anywhere in the world and will come back to you fast with a quote 

As we keep control of the manufacturing process we are able to deliver all presses within 10 weeks from order

and we hold a great amount of stock here in the UK with full spares back up. 

The Conveyor Shop Vulcanising Press

MVP-1943 (480mm x 1090mm ) 

Recommended maximum belt width 36 ich / 915mm 

( The maximum length across the Platen is 40 inch / 1015mm )

Control box and leads 415v 50Hz

This press is 3 phase and works on a 22* bias 

comes with:

4 x Lightweight aluminium beams (AE 1390 X 178 X 197 mm ) 28kgs

4 x Retaining bolts. 

1 x Pair of platens with new silicone heating elements with fast heat up and rapid water cooling.

1x New design air bag with universal quick coupling. 

1 x control box with a pair of leads with harting type connector 

1x Power cable ( 5pin 32amp) 

1 x Set of ‘in and out’ fast water cooling pipes (water pumps for cooling can be sold separately) 

Equipment fully tested in the Conveyor shop workshop in Leicester and holds two year guarantee. 

Full parts and repair service available.

Offering great size versatility with complete coverage of all splice lengths, either fabric ply and steelcord. 

Air to 100 psi, or water bag 200psi (water pumps separately sold )

MVP (modular vulcanising press)  is extremely portable as its a modular design so great for the workshop or on site.

The Conveyor shop have worked on this project for many years to give the best Quality and usable product

Full training on how to use equipment available free of charge,

Also Conveyor belt splice training can be carried out on your site. 

For more information, please do not hesitate to contact us.

The Conveyor Shop

Please get in contact for a detailed quote and specification sheet sent directly to your email. 

There are many options for larger Platens longer splices, just send us your enquiry and belt specification anywhere in the world and will come back to you fast with a quote 

As we keep control of the manufacturing process we are able to deliver all presses within 10 weeks from order

and we hold a great amount of stock here in the UK with full spares back up. 

The Conveyor Shop Vulcanising Press

MVP-2843 (710mm x 1090mm ) 

Recommended maximum belt width 36 ich / 915mm 

( The maximum length across the Platen is 40 inch / 1015mm )

Control box and leads 415v 50Hz

This press is 3 phase and works on a 22* bias 

comes with:

6 x Lightweight aluminium beams (AE 1390 X 178 X 197 mm ) 28kgs

6 x Retaining bolts. 

1 x Pair of platens with new silicone heating elements with fast heat up and rapid water cooling.

1x New design air bag with universal quick coupling. 

1 x control box with a pair of leads with harting type connector 

1x Power cable ( 5pin 32amp) 

1 x Set of ‘in and out’ fast water cooling pipes (water pumps for cooling can be sold separately) 

Equipment fully tested in the Conveyor shop workshop in Leicester and holds two year guarantee. 

Full parts and repair service available.

Offering great size versatility with complete coverage of all splice lengths, either fabric ply and steelcord. 

Air to 100 psi, or water bag 200psi (water pumps separately sold )

MVP (modular vulcanising press)  is extremely portable as its a modular design so great for the workshop or on site.

The Conveyor shop have worked on this project for many years to give the best Quality and usable product

Full training on how to use equipment available free of charge,

Also Conveyor belt splice training can be carried out on your site. 

For more information, please do not hesitate to contact us.

The Conveyor Shop

Please get in contact for a detailed quote and specification sheet sent directly to your email. 

There are many options for larger Platens longer splices, just send us your enquiry and belt specification anywhere in the world and will come back to you fast with a quote 

As we keep control of the manufacturing process we are able to deliver all presses within 10 weeks from order

and we hold a great amount of stock here in the UK with full spares back up. 

The Conveyor Shop Vulcanising Press

MVP-1950 (480mm x 1270mm ) 

Recommended maximum belt width 42 ich / 1065mm 

( The maximum length across the Platen is 46 inch / 1170mm )

Control box and leads 415v 50Hz

This press is 3 phase and works on a 22* bias 

comes with:

4 x Lightweight aluminium beams (AE 1570 X 178 X 197 mm ) 31kgs

4 x Retaining bolts. 

1 x Pair of platens with new silicone heating elements with fast heat up and rapid water cooling.

1x New design air bag with universal quick coupling. 

1 x control box with a pair of leads with harting type connector 

1x Power cable ( 5pin 32amp) 

1 x Set of ‘in and out’ fast water cooling pipes (water pumps for cooling can be sold separately) 

Equipment fully tested in the Conveyor shop workshop in Leicester and holds two year guarantee. 

Full parts and repair service available.

Offering great size versatility with complete coverage of all splice lengths, either fabric ply and steelcord. 

Air to 100 psi, or water bag 200psi (water pumps separately sold )

MVP (modular vulcanising press)  is extremely portable as its a modular design so great for the workshop or on site.

The Conveyor shop have worked on this project for many years to give the best Quality and usable product

Full training on how to use equipment available free of charge,

Also Conveyor belt splice training can be carried out on your site. 

For more information, please do not hesitate to contact us.

The Conveyor Shop

Please get in contact for a detailed quote and specification sheet sent directly to your email. 

There are many options for larger Platens longer splices, just send us your enquiry and belt specification anywhere in the world and will come back to you fast with a quote 

As we keep control of the manufacturing process we are able to deliver all presses within 10 weeks from order

and we hold a great amount of stock here in the UK with full spares back up. 

The Conveyor Shop Vulcanising Press

MVP-2850 (710mm x 1270mm ) 

Recommended maximum belt width 42 ich / 1065mm 

( The maximum length across the Platen is 46 inch / 1170mm )

Control box and leads 415v 50Hz

This press is 3 phase and works on a 22* bias 

comes with:

6 x Lightweight aluminium beams (AE 1570 X 178 X 197 mm ) 31kgs

6 x Retaining bolts. 

1 x Pair of platens with new silicone heating elements with fast heat up and rapid water cooling.

1x New design air bag with universal quick coupling. 

1 x control box with a pair of leads with harting type connector 

1x Power cable ( 5pin 32amp) 

1 x Set of ‘in and out’ fast water cooling pipes (water pumps for cooling can be sold separately) 

Equipment fully tested in the Conveyor shop workshop in Leicester and holds two year guarantee. 

Full parts and repair service available.

Offering great size versatility with complete coverage of all splice lengths, either fabric ply and steelcord. 

Air to 100 psi, or water bag 200psi (water pumps separately sold )

MVP (modular vulcanising press)  is extremely portable as its a modular design so great for the workshop or on site.

The Conveyor shop have worked on this project for many years to give the best Quality and usable product

Full training on how to use equipment available free of charge,

Also Conveyor belt splice training can be carried out on your site. 

For more information, please do not hesitate to contact us.

The Conveyor Shop

Please get in contact for a detailed quote and specification sheet sent directly to your email. 

There are many options for larger Platens longer splices, just send us your enquiry and belt specification anywhere in the world and will come back to you fast with a quote 

As we keep control of the manufacturing process we are able to deliver all presses within 10 weeks from order

and we hold a great amount of stock here in the UK with full spares back up. 

The Conveyor Shop Vulcanising Press

MVP-1958 (480mm x 1475mm ) 

Recommended maximum belt width 48 ich / 1200mm 

( The maximum length across the Platen is 54 inch / 1370mm )

Control box and leads 415v 50Hz

This press is 3 phase and works on a 22* bias 

comes with:

4 x Lightweight aluminium beams (AEX 1780 X 178 X 267 mm ) 46kgs

4 x Retaining bolts. 

1 x Pair of platens with new silicone heating elements with fast heat up and rapid water cooling.

1x New design air bag with universal quick coupling. 

1 x control box with a pair of leads with harting type connector 

1x Power cable ( 5pin 32amp) 

1 x Set of ‘in and out’ fast water cooling pipes (water pumps for cooling can be sold separately) 

Equipment fully tested in the Conveyor shop workshop in Leicester and holds two year guarantee. 

Full parts and repair service available.

Offering great size versatility with complete coverage of all splice lengths, either fabric ply and steelcord. 

Air to 100 psi, or water bag 200psi (water pumps separately sold )

MVP (modular vulcanising press)  is extremely portable as its a modular design so great for the workshop or on site.

The Conveyor shop have worked on this project for many years to give the best Quality and usable product

Full training on how to use equipment available free of charge,

Also Conveyor belt splice training can be carried out on your site. 

For more information, please do not hesitate to contact us.

The Conveyor Shop

Please get in contact for a detailed quote and specification sheet sent directly to your email. 

There are many options for larger Platens longer splices, just send us your enquiry and belt specification anywhere in the world and will come back to you fast with a quote 

As we keep control of the manufacturing process we are able to deliver all presses within 10 weeks from order

and we hold a great amount of stock here in the UK with full spares back up.